ip address

[lunar_eclipse_82]

---

can someone tell me what is the Ip address for Draytek vigor 2500

[nuxthru]

Try this ip 192.168.0.1. That's the usual ip commonly used for the router inorder to work. Or try read an instruction in the manual if it is exist.

[lunar_eclipse_82]

well that 's the problelm. I lost my manual. I ask lots of people, but they seems not to know. I only try here because there must me person that have an idea.

[darknite]

why not look for official documentation of it in the internet...

surely, the manufacturer of your equipment has online support.

[muzikfreakah]

is the draytek vigor 2500 a router? All you have to do is do a hard reset on the device to restore everything to factory default and then try any of these addresses 192.168.1.1, 192.168.0.1 If it doesnt work email the manufacturer.

[CrasHBURN]

try 192.168.2.1 too... and make sure your PC is set to "Obtain IP address automatically"...

[AMD_infinium05]

okay... try to use DHCP bro.... unya adto sa start > run > "cmd" and type in netstat -r

there u will see your computer's routing settings... your GATEWAY IP wud be your modem/router

[Devian]

Depende na sa imo ISP bro. either they will provide the IP to ur equipment which u will set ur equipment to "obtain automatically" or you will set it manually according to u preference but it should be a private IP range....

[CrasHBURN]

Devian: wala'y labot ang ISP... ang problem is IP address sa router...

try this:

set your TCP/IP settings to "Obtain IP Address Automatically"
start, run... "CMD"
from the prompt, "ipconfig"
it'll show your IP address, subnet and gateway...

the gateway is your Router's IP Address..

[lunar_eclipse_82]

ok I will try it. thanks for sharing your idea...