Please Help!!! CM Omega HD 2.0 System Software Update problem

[Syd_M]

---

mobile uncle tool suggestion is para sa iyang OHD2.0. i wouldn't suggest for an apk if i knew it was bootloop state!!!

His OHD2.0 is stuck in recovery boot loop, and the only Mobile Uncle Tools I know of is an app that needs to be installed on the phone (if there's a desktop version, I can't find a mention of it). So unfortunately, he won't able to use Mobile Uncle to try to restore the stock recovery. He'll need to flash the recovery from a PC, instead. It shouldn't be a problem, though, as long as he has the drivers and ADB/fastboot installed.

[werty]

basaha tarong ang thread. wala syay issue sa OHD2.0 aside lang sa dili sya maka OTA coz cm_ota needs stock recovery to update. ang bootloop nya is ang starmobile.

[Syd_M]

basaha tarong ang thread. wala syay issue sa OHD2.0 aside lang sa dili sya maka OTA coz cm_ota needs stock recovery to update. ang bootloop nya is ang starmobile.

*sigh*

Now once i click on "Update Now", it goes to another page that states: "System Software Update. Ready to update your device. Your device is not available during update. Continue?". And it has two options again: "Yes" or "No".
I then clicked on "Yes", an then my phone turned off, reboots itself and goes into recovery mode.

That's a recovery boot loop -- basically, the phone automatically boots into recovery instead of booting normally. That's what happens when you try to install an official OTA update when you're using a custom recovery (except unless you have TWRP, as that issue has been fixed in the latest versions). This is because the phone's FOTA partition contains the update, which the phone automatically tries to load, but can't because of the custom recovery (in the OP's case, he's using CWM recovery). So yeah, he has a boot loop issue, hence Mobile Uncle Tools won't help him.

[werty]

Clearly, wala ka makasabot. Anyways TS don't work not able to update. Unless naa kai blema same phone and the update specifies the fix.

[Syd_M]

Clearly, wala ka makasabot.

That's funny. I post a detailed explanation of what happens during a failed OTA update attempt while you have a custom recovery, and apparently I don't understand the issue.

Edit: To clarify, unless the OTA update was made to work with CWM, attempting to install it would result in either of two things: A) the update will fail, after which you will be able to boot normally (but without the update), and (more likely) B) the OTA update will remain on your phone's FOTA partition and will attempt to install every time you boot up, but fails and throws you into recovery mode. If the OP is lucky, he gets option A. However, the usual result is option B, in which case, he would need to either wipe the FOTA partition or install the stock recovery so that the OTA update will go through.

[Skunk2]

Hello Sir,

Good day!

I followed the instructions on how to flash into stock recovery to do ota and I was able to flash my omega hd 2.0 to its stock recovery however I am getting the no command, I able to flash my phone back to cwm or twrp however I wanted to be able to do ota update. The methods that I used are both the Mobile Uncle Tool and I also tried SP Flash Tool.

Whenever I flash to its stock recover I get the no command and these are the options

-reboot system now
-apply update from ADB
-apply update from SD card
-apply update from cache
-wipe data/factory reset
-wipe cache partition
-back up user data
-restore user data

Please help

[Skunk2]

Subscribing to this thread. Reposting para maka dawat ko email if naa mo reply mga sir...

[werty]

Hello Sir,

Good day!

I followed the instructions on how to flash into stock recovery to do ota and I was able to flash my omega hd 2.0 to its stock recovery however I am getting the no command, I able to flash my phone back to cwm or twrp however I wanted to be able to do ota update. The methods that I used are both the Mobile Uncle Tool and I also tried SP Flash Tool.

Whenever I flash to its stock recover I get the no command and these are the options

-reboot system now
-apply update from ADB
-apply update from SD card
-apply update from cache
-wipe data/factory reset
-wipe cache partition
-back up user data
-restore user data

Please help

press Power button to access menu on stock recovery...

PS: nakasulod man lagi ka sa menu? so whats the problem? naa naman kai stock recovery...

[Syd_M]

@Skunk2; are you able to boot normally, or are you stuck with the "No command" message on recovery? In any case, some people have been able to resolve similar "No command" issues by sideloading the OTA update via ADB or fastboot. Unfortunately, I can't find the OTA update image for the CM OHD2, so sideloading isn't an option for you (unless someone somewhere has the OTA update image, then maybe we can give it a try). There seems to be lots of problems attempting an OTA update while rooted, so my suggestion for you (if you're not stuck on a bootloop), would be to unroot your device (I assume you're rooted, based on your statements), restore stock recovery, then try the OTA update. Once the OTA update is successful, you can root it again.

You can root/unroot using Framaroot -- just download and install the latest version, then follow the instructions. Or watch this video for instructions.

[nickgandionco]

Edit. Removed. Hehehhe