All about Closed-loop Liquid Coolers

[sercor::jhumzki]

---

unsa ang pinaka nndot Seidon 240M or Thermaltake 2.0 (out na ba ang 3.0?)

kinsay naggamit og ELC 240, H100i, Kuhler H20 920, LQ310, H60 rev.2 diha ari ta dnhe

[senpai91]

H20 920 user. very satisfied with performance. unsa diay ang imong proc kung mga Close LCS man ka? any plans for OC?

i'm not really into overclocking but since i got an i5 3570k why waste it nad its cooled by 920 never disappoints me...

[duty-free]

ask lng ko duna baya kalahian sa cpu temperature ang pag taud sa radiator kung ang hose adtu sa ibabaw?...
...kung ubos ang hose musangyad mn gud sa video card...init baya ang vc....gets niyo?

[LadYKilleR8520]

@duty-free theoritically speaking, the best case scenario for any liquid cooling loop is to have no ups or down whatsoever.. best gyud is kung ang hose is naa sa side, since the liquid wont need to go up or down, everything is flat, thus the pump does not need to exert more effort and the liquid reaches the radiator faster.. but in actual use, the difference between temperatures between the two orientation is too small to consider..

[duty-free]

LadYKilleR8520 ,
How come nga ang manufacturer recomend thus position only ider up or down? karun pko ka dungog ana imu ingun bro nga sa side ang radiator,dile man maigo sa casing kun babag ang radiator...libog ani oy.

- - - Updated - - -

regarding sa push/pull fan;intake to the case or exhaust from the case? unsay inyu gibuhat sa inyu mga radiator? share daw mo bhe...

[LadYKilleR8520]

the orientation of the Radiator will only matter if there is difference in the size of the tubing which was intentionally designed by the manufacturer in the first place. If the manufacture states that the CLC is better in a specific orientation, then that orientation must be followed. theoritically (based on the laws of Hydraulics) a freely moving liquid travels best on an inclined surface if going down, but since either orientation UP or down would have a either an intake or outtake hose inclined where a gravity pulls the water, then in this case, the orientation will matter..
im saying, nah mas saun m.flow ang tubig kung paubos, and mas lisod kung patangas.. since ang duha ka hose is pasaka and panaog, either orientation sa radiator nimo, naa gyud isa ka hose pasaka and isa ka hose ang panaog.. ang best ani, based on rules of thermodynamics.. mas maau if ang panaog ug pasaka kay equal rah, meaning flat lang, so sa side ang hose...but since dili man masulod sa case ang anah nga orientation ang better ani nila is naa sa taas ang hose nga padung sa CPU block then naa sa ubos ang gikan sa CPU Block.. since wala pud gadesign ug ing.anah nga CLC, then ang better orientation is naa ang hose sa babaw..

[LadYKilleR8520]

heat expands water, so mas saun para sa init nga tubig ang pagsaka sa radiator, kysa sa bugnaw nga tubig.. so mas maau nga ang imong hose gikan sa cpu block ang gatangas, daun ang hose nga intake sa CPU block kay gapanaog..

[LadYKilleR8520]

regarding sa push/pull fan;intake to the case or exhaust from the case? unsay inyu gibuhat sa inyu mga radiator? share daw mo bhe...

Dependi ni sa imong pressure orientation sa imong case,
Small case + Possitive pressure = exhaust from case
Small Case + Negative Pressure = Intake to case
Big Case + Possitive Pressure = Exhaust from Case
Big Case + Negative Pressure = intake to case

magdepend pud cya sa imong GPU:
Closed Shroud GPU = Exhaust from CASE
Open Shroud GPU = Intake to case

Best way to decide is to test your ambient temperature inside the case, if bugnaw ang air sa sulod, then exhaust from case ang RAD, if init ang sulod sa case, then Intake ang RAD.. this will increase temps of the case, but will help CPU temps

best gyud is to follow sa imong airflow...

[duty-free]

got it bro! how about push/pull bro? intake or exhaust ang hangin sa casing?

- - - Updated - - -

LadYKilleR8520 thank you bro!

[LadYKilleR8520]

better mkahibaw sa case nga imo gigamit para ma.plot ug tarong ang airflow.. and what kind sa video Card..

this is closed shroud Video card, all heat from GPU is axhausted outsid the case, No heat is left inside the case, the temperature of the VC sucks with this type of cooler

This is an open shroud VC, better temps for the VC, but heat is exhausted inside the case, which is bad for CPU