Hi folks, I'm new here...so anyways i was hoping anyone could shed some light on my problem.
Here are the PC's specs:
Motherboard: ASUS P7P55D-E LX LGA 1156 socket
Processor: Core i3 540 (yeah i know really old cpu but still works for me, if ain't broke don't fix it)
RAM: 2 x 4gb gskillz ripjaws DDR3 1866mhz
PSU: Generic 650W PSU...
I recently installed a new heat sink for the CPU kay i wanted to try a little overclocking. Temps went over 100 deg. bisag 20-30% load ra kay stock cooler raako gamit. Got a CM Seidon 120M, with a free 120mm fan para naa push and pull of air on the radiator, is this a bit overkill para sa ako old CPU? Anyways, ang problema lang kay when I powered it up, mu siga ang board but dili mo boot ug dili sd mu produce ug beep sound. Then, i tried using 1 stick of RAM lng kay i suspected it could be RAM problems and 'lo and behold ni boot complete with beeping sound. Music to my ears jud to when i heard it kay i thought naguba. Then i tried using the other stick just to make sure nga dili ang RAM ang faulty so far ni boot man. I thought this would be a compatibility issue so i checked the manual and well, di man diay mu support ang board sa RAM. What bothers me lang is when i was still using the stock heat sink it boots up even with both sticks in. But after ka install sa new heat sink 1 stick na lng. I suspect it could be a PSU issue kay stock heat sink 1 ra ka power connector. New heat sink, 1 for heat sink power, 1 for 120mm fan, then one for radiator. So is this a power supply issue? Seeing as I'm only using a generic 650W. Thanks daan.