Specs:
(Combo ni pag palit 2nd hand, cheap, mao ako d palit walay 3mins na testing.LOL)
Intel Pentium 2160 (stock speed)
ECS P4M890T-M V2.0 (Pentium 2160 not supported CPU) but the original owner used this rig for many years.
1X2GB Kingston DDR800
added:
Civo 600W PSU - brand new
80GB WD SATA
Samsung DVDwriter SATA
Problem:
#Reformat , OS installation, drivers ok ra ang unit..everything looks perfect. But anything after an hour or less,
mag start na xa ug restart. Once mag start na xa ug restart, mag cge nalang balik2x ug restart, even dd2 rko sa BIOS, mo
restart lang gypn. Sa cge na xa balik2x ug restart, wa na xa display (monitor), WEIRD kay ga normal beep lang gyapon xa.
Ako d try ug gamitan ug VC, basin On-board video faulty. mao lang gypn mag restart. Pero after 3hrs naka power off/unplug,
ok napud ng unit... but mao lagi mo restart after an hour or less than an hour. Basta duol sa 1hr ug usahay lapaw gamay.
akong d himo na troubleshooting....
--> 1) Overheating?? --- ako d gamitan ug stability test (AIDA 64) for an hour, ok man no problem..But after ani.na ako ng
d stop... mga 15mins nag start na nasad ug restart. Once mag restart ni xa mag cge nalang balik2x even dd2 rko sa BIOS, mo
restart ra gyapon.
-->ako pd d try ug tan-aw sa BIOS after xa mag restart sa Hardware Monitor - Ok rman ang CPU temperature mga 40C+
-->pag cge2 na ug restart ako pd d try ug hikap ang HSF sa CPU , HS sa northbridge wa man ga init.
2) Change memory -- ako d try ug lain na DDR533 memory na 1GB, mao lang gypn mo restart after or less than an hour.
3) Headers & SATA cables ako d isolate mao lang gypon resulta.
4) CLR CMOS, tang2 battery, default BIOS settings - mao ra gypon resulta.
5) ako pd xa d try ug gamit VC brand new Sparkle 7200GS 256MB (old stock ako na palit, but sealed pa). Mao gypn
resulta.
Ang wa nko ma try ug saksak/swap/testing sa lain nga unit ang PSU, mobo, ug processor.