OC experts help me! :D

[sioti49]

---

set up

phenom II 555 be---> unlocked to 4 cores (currently running @ 3.80ghz) 1.45V

FSB running @ 238
RAM 4x2gb Gskill ripjaws 1333mhz (9-9-9-33 2t) (currently running @ 1587mhz)

WHAT TO DO??
should i lower the ram ration to obtain back to 1333mhz then change a tighter timing like (7-7-7-22 2t)
or should i tighter the timings with the overclock speed 1587mhz?

[KH0UJ]

bro unsa di-ay gusto nimo i-achieve sa imong overclock? highest stable CPU clock? o highest stable benchmark scores?

naa man guy instance nga taas tu-od imong CPU clock pero hinay inig benchmark kay lu-ag na kaayo imong memory timings just to have a stable higher clock...

[werty]

amd loves tight timings--- if can get it as low timings as possible w/o goin below sa iya rated speed mas maayo. tight timings at highest bandwidth much better...

[keropi]

Bain madala pa na sa 1587mhz, 7-8-7-24 or 7-9-7-27..

[atay na!!!]

wow overclocking namn..heheheh

[Sempron Guy]

do a memory benchmark, compare as mas dako ug gain, much better though if you can increase and tighten both freq. and ram. I think possible man cguro na with a little voltage increase sa ram.

[balipseyev]

bro i tight pa imuhang timings sa RAM... mas nindot resulta if gagmay ang timings, in-ana pud akoang Procie... nya ang timing sa RAM kay 7-7-7-24... Wala lang naku gi usab ang FSB...

[sioti49]

thanks bro.

ang ako is to have a stable overclock cpu. with highest posible
na a try nako ug tight ang timings to 8-9-9-24 taas ang score but not stable huhuhu
ill try to up the voltage sa ram but pila man limit sa voltage?

[keropi]

Safe voltage as per GSkill Tech is 1.65v. But try lang sa iadjust ang timings one at a time starting with CL. 8-9-8-27 is slightly better than 8-9-9-24

[sioti49]

cge2x boss ako e try nig abot nako sa amo a. so ako e adjust na ang voltage ani?