Amplifires:
Ultimate A6 - The Mono Amp, 1200 Watt
ULTIMATE series A6.
A 1 ohm stable monoblock, perfect for SPL.
Extremely powerful power supply.
The output power in 4 ohms are 500 thrue RMS watts.
A cooling fan is built in but the amplifier also provides a built-in fan control for external cooling fan.
- Built-in, variable 50-125 Hz low pass filter for subwoofers plus a 25 Hz subsonic filter with an 18 dB/octave slope.
- Dual power terminals where you can connect dual power feeds or a DLS Power Cap.
- Extra features are a phase control variable 0-180 degrees continiously.
- A remote sub level control is included. Adjust the sub level and phase from the front seat!
- RMS output power @ 13,8V DC feed
A6 is our most sold mono amplifier with high stability and a power supply that handles any load down to 1 ohm.
Specifications
Number of channels 1
Amplifier class AB
Output power in 4 ohm 500 W RMS
Output power in 2 ohm 870 W RMS
Output power in 1 ohm 1200 W RMS
Damping factor > 200
S/N ratio, A-weighted > 100 dB
Frequency range 10 Hz - 125 Hz
Input sensitivity 0,2 - 7 V
Input impedance, high level N/A
Input impedance > 10 kohm
High pass filter Subsonic: 25 Hz
Low pass filter 50-125 Hz
External cooling fan terminal Yes
Dual DC inputs Yes
Low level output No
Phase control for subwoofers 0- 180 degrees cont. variable
High level input with auto start No
Remote bass level control Yes
Remote phase shift control Yes
Integrated fan Yes
Power consumption (idle) 0,6 A
Power consumption (max) 140 A
Rec. power cable Minimum 2AWG / 33 mm2
Fuses 4 x 35 A
Dimension (W x D x H) 410 x 240 x 73 mm (16,15 x 9,45 x 2,87 inch)
Weight 6,2 kg ( 13,67 lb)
Performance CA12 - 1 x 500 Watt RMS
CA 12 is a powerful mono amplifier with a nominal output of 220 Watts in 4 ohm, 400 Watts in 2 ohm load, and 500 Watts in 1 ohm load.
- Built-in low-pass filter for subwoofers, variable between 50 and 500 Hz.
- Variable subsonic filter 15-150 Hz.
- Continuously variable phase control 0-180 degrees.
- Built-in protection circuits shut down the amplifier in the event of overloads.
- High level input with automatic start.
- Cooling fan in the bottom plate.
- RMS output power @ 13,8 V
This is one of our most popular mono amplifiers with high reliabilty.
Specifications
Number of channels 1
Amplifier class AB
Output power in 4 ohm 220 W RMS
Output power in 2 ohm 400 W RMS
Output power in 1 ohm 500 W RMS
Mono bridge mode 4 ohm N/A
Damping factor > 100
S/N ratio, A-weighted > 100 dB
Frequency range 10 Hz - 35 kHz
Low level output No
Input sensitivity 0,25 - 5 V
Input impedance > 10 kohm
Input impedance, high level 100 ohm
High pass filter 15 - 150 Hz
Low pass filter 50 - 500 Hz
Phase control for subwoofers 0-180 degrees con. variable
High level input with auto start Yes
Power consumption (idle) 0,8 A
Power consumption (max) 60 A
Rec. power cable Minimum 5AWG / 16 mm2
Fuses 2 x 30 A
Dimension (W x D x H) 70 x 312 x 268 mm / 2,92 x 12,28 x 10,55"
Weight 3,8 kg / 8,4 lb
Reference RA10 - 780 Watt mono amplifier
REFERENCE series RA10 is a mono amplifier rated at 300 Watts. Provides a nominal output of 500 Watts in 2 ohm load and 780 Watts in 1 ohm load.
- Built-in variable 40-125 Hz low-pass filter and 25 Hz subsonic filter.
- Grand bass 0-18 dB.
- Phase shift control.
- High level input with automatic start.
- Remote bass level and phase control unit is included.
- Built-in cooling fan.
- RMS output at 13,8 volts , < 0,1% distortion.
.
Specifications
Number of channels 1
Amplifier class AB
Mono bridge mode 4 ohm N/A
Output power in 4 ohm 300 W RMS
Output power in 2 ohm 500 W RMS
Output power in 1 ohm 780 W RMS
Damping factor > 200
S/N ratio, A-weighted > 100 dB
Frequency range 10 Hz - 125 Hz
Input sensitivity 0,5 - 8 V
Low level output No
Input impedance > 10 kohm
Input impedance, high level 330 ohm
Phase control for subwoofers 0-180 degrees variable
High pass filter Subsonic 25 Hz / 18 dB slope
Low pass filter 40-125 Hz / 12 db slope
Grand bass filter 0-18 dB @ 40 Hz
High level input with auto start Yes
Remote phase shift control Yes
Remote bass level control Yes
Integrated fan Yes
Power consumption (idle) 0,6A
Power consumption (max) 120 A
Rec. power cable Minimum 2AWG / 33 mm2
Fuses 4 x 30 A
Dimension (W x D x H) 359 x 245 x 59 mm (14,1 x 9,65 x 2,33 inch)
Weight 4,3 kg ( 9,5 lb)
Speakers:
Performance C6A - 2-way system 6,5 inches
Performance series C6A is a 16,5cm (6,5") 2-way component using DLS EFR-technology for improved sound quality.
- Separate filter boxes for bass and tweeter with air coils for maxiumum performance.
- Selectable tweeter level.
- T20 is a 20 mm silk dome tweeter.
- Grilles are included.
C6A have the DLS EFR system (Extended Frequency Response) for improved midrange
Specifications
Woofer size 16,5 cm (6,5")
Tweeter T20, 20 mm (0,8") silk dome tweeter
Power handling capacity 60 W RMS / 90 W max
Impedance 4 ohm
Frequency range 50 - 20.000 Hz
Sensitivity 93 dB (1W/1m)
Outer diameter of woofer 165 mm (6,5")
Magnet size 80 mm (3,15")
Mounting depth 63 mm (2,48")
Crossover Cable filter with slope LP: 6 dB, HP: 12 dB
Crossover point (Hz) 5000 Hz
Size of filter box 105 x 44 x 35 mm (4,13 x 1,73 x 1,38")
Mounting hole 146 mm (5,75")
Performance C36 - 3-way component kit
Performance series C36 is a 3-way component kit with:
- 16,5 cm (6,5") bass,
- 10cm mid (4") - 20 mm (0,8") tweeter.
- Powerful magnet system.
- Filter boxes with selectable tweeter level.
- 20 mm (08") silk dome tweeter, T20.
- Grilles are included.
Specifications
Tweeter T20 - 20 mm (0,8") silk dome tweeter
Woofer size 16,5 cm (6,5")
Midrange size 10 cm (4")
Power handling capacity 60 W RMS / 90 W max
Frequency range 60 - 20 000 Hz
Crossover point (Hz) 450Hz / 6000 Hz
Impedance 4 ohm
Sensitivity 93 dB (1W/1m)
Outer diameter of woofer Woofer 165 mm (6,5"). Midrange 100 mm (3,94")
Magnet size Woofer 80 mm (3,15"). Midrange 70 mm (2,75")
Crossover Filter box with 12/6/12 dB slope
Size of filter box 145 x 85 x 45 mm ( 5,71 x 3,35 x 1,77")
Mounting depth Woofer 63 mm ( 2,48"). Midrange 58 mm (2,28")
Mounting hole Woofer 146 mm (5,75"). Midrange 102 mm (4")
Reference RM6.2 - 2-way component 6,5 inches
Reference RM6.2 is a 16,5 cm (6,5") 2-way component with an incredible bass.
- Powerful magnet system.
- Designed to play loud but still with full control and good sound quality.
- Crossovers with selectable tweeter level in four steps.
- Aluminium cone and dual upper surround.
- 25 mm silk dome tweeter T25.
- Grilles are included.
NOTE! The speaker impedance is 3 ohm. If you plan to connect the RM6.2 in bridge mode the amplifier must be 1 ohm stable. Not suitable for CA41 and CA51 amps.
Specifications
Woofer size 16,5 cm (6,5")
Tweeter T25, 25 mm (1,1") silk dome tweeter
Power handling capacity 100 W RMS / 200 W max
Impedance 3 ohm
Frequency range 30 - 20.000 Hz
Sensitivity 86,7 dB (1W/1m)
Crossover Filter box with 6/12 dB slope (LP/HP)
Crossover point (Hz) 4500 Hz
Size of filter box 145 x 85 x 45 mm ( 5,71 x 3,35 x 1,77")
Outer diameter of woofer 165 mm (6,5")
Magnet size 110 mm (4,33")
Mounting hole 140 mm (5,5")
Mounting depth 72 mm ( 2,83")
T/S parameters
single V/C
Fs 51,8 Hz Re 2,7 Ohm Qms 3,85
Vas 12,3 liter Vas 0,43 Cuft Qes 0,58
Qts 0,51 Sd 154 cm² BL 6,17
Gothia 6.3 - 3-way component, 6,5 inches
Ultimate series Gothia 6.3 is a new16,5 cm (6,5") 3-way component.
- The 6,5" driver uses a cone of carbon fibre mounted in a cast basket.
- The midrange is Gothia 3 (3", 75 mm) mid dome speaker. - Ferrite magnet system on bass and mid while the tweeter has a neodymium magnet system.
- Filter boxes with selectable tweeter level in three steps.
- 28 mm silk dome tweeter Gothia 1.
- Grilles are included.
In the magnet system we use a new T-type T-yoke with integrated copper rings for improved cone control and lower distortion.
This Gothia system gives you a high resolution sound full with details.
Specifications
Woofer size 16,5 cm (6,5")
Tweeter Gothia 1, 28 mm (1,1") tweeter in metal housing
Power handling capacity 100 W RMS / 180 W max
Impedance 4 ohm
Frequency range 30 - 25.000 Hz
Sensitivity 91 dB (1W/1m)
Crossover Box filter LP12dB / HP 6, LP 6 dB / HP 12 dB
Crossover point (Hz) 400 Hz / 5500 Hz
Size of filter box 145 x 85 x 45 mm ( 5,71 x 3,35 x 1,77")
Outer diameter of woofer Woofer: 165 mm (6,5") Mid: 120 mm (4,72")
Mounting hole Woofer: 140 mm (5,5") Mid: 95 mm (3,74")
Magnet size 100 mm (3,35")
Mounting depth Woofer: 72 mm ( 2,83") Mid: 35 mm (1,38")