help: motherboard atx 12v 2x4pin port incompatibility

[jeniverre]

---

Hi I have a problem sa cable sa PSU to motherboard for ATX_12v_2x4pin...
Specs:
Mobo: gigabyte h67ma-ud2h b3
PSU: silverstone strider sst50f-230 500w modular

Please take a look sa diagram

mobo:
1st column (left) = not square, square, square, not square
2nd column (right = square, not square, not square, square


PSU:
(di na nko isulti kung square or not square basta please take a look dvah lahi xa bsan unsa nko bali2x)


Please help... unsa dapat nko buhaton? =(

thanks



-----------ah! by the way, just searched thoroughly sa net karon lang and read NUMBER 9th post (GA-EX58-UD4P No Video Problem) that there were different types of atx 12v ports to consider. so does it mean na all I have to use is the 1x4pin (without connect the other half of the 2x4pin?) Please enlighten me more guys kay hasol kaayo dal-on nko sa downtown ang chassis dako pa nko T_T unya busay pa jud amoa...motor ray makasokol permi... T_T

[werty]

pansak ra na bossing... bisan mabali ang position sa duha ka connectors(although d na ma orient ang clip) d man gihapon mabali ang orientation sa +12v(yellow) ug GND(black)... and yellow ana will still be on the left(based on your motherboard picture)

[balipseyev]

murag masulod ra man na...

[zhrike]

pwede ra na ang 1x4pin bro...

[dhekoy33]

masulod rana ang female connector or pedi 1x4pin imu gamiton.

[siopao1984]

murag sa video card man ni na connector

pwde ra katong 1x4pin 12v power connector. its not necessary na 2x4pin connector ang gamiton mo

[werty]

murag sa video card man ni na connector

pwde ra katong 1x4pin 12v power connector. its not necessary na 2x4pin connector ang gamiton mo

nada.... mao ni ang dagway sa 8-pinc pcie connector bro.


3pin +12v, 5 are ground pins....

[jeniverre]

@all: thanks guys! Yes masulod ra man xa but i'm worried na it will damage the mobo. So dli na diay mo matter if dli parehas ang isig t0m0y? Diritso nlng nko pansak?

So Asa juy masmayo, if 1x4pin ra ak0ng ec0nnect (kay mao ra jud ang sakto na bangag) OR ang tanan 2x4pin ang ec0nnect even if the 2nd half is inc0mpatible but seems ok to fit kay masulod ra jap0n. Thanks kau..

@siopao: lain pod ang pcie nko dri 6pin ra..

[butitoy]

Hi I have a problem sa cable sa PSU to motherboard for ATX_12v_2x4pin...
Specs:
Mobo: gigabyte h67ma-ud2h b3
PSU: silverstone strider sst50f-230 500w modular

Please take a look sa diagram

mobo:
1st column (left) = not square, square, square, not square
2nd column (right = square, not square, not square, square


PSU:
(di na nko isulti kung square or not square basta please take a look dvah lahi xa bsan unsa nko bali2x)


Please help... unsa dapat nko buhaton? =(

thanks



-----------ah! by the way, just searched thoroughly sa net karon lang and read NUMBER 9th post (GA-EX58-UD4P No Video Problem) that there were different types of atx 12v ports to consider. so does it mean na all I have to use is the 1x4pin (without connect the other half of the 2x4pin?) Please enlighten me more guys kay hasol kaayo dal-on nko sa downtown ang chassis dako pa nko T_T unya busay pa jud amoa...motor ray makasokol permi... T_T

sakar ra na bro..gituyo na ang shapes niya aron dili mag ka bali..

universal standard ang pag ka design ana, maski unsa pay ngalan sa board nga naay dual 12V 4PIN socket, musakar gyud any brands sa PSU na with 2 x 12V 4Pin molex connector..

tan-awa lang ug ayo ang shape

[werty]

i connect na tanan 8 connectors since its designed that way...