mo hang up and monitor no signal afterwards..

[aiori]

---

unsa kahay culprit ani? ga problema ko sa akong usa ka unit kay mo hang then monitor no signal afterwards random ra ni cya mo occur, mostly kung duwaan ug bug-at na games like starcraft 2, 4 years na ni nga pc unya gi convert ug piso2x so far karon ra ko gaproblema..
specs:
intel E5500 2.8ghz
asus p5vd2-mx
kingston 1g and 512mb blitz parehas 533
power color hd2600xt 512mb gddr3
generic 600watts power supply

countermeasures:
tried pulling out the vc in order to use the on-board vc still the same
pulled out the ram sticks still the same

unsa kaha problema ani niya mga bro?

[butitoy]

overheating VC

HD2xxx has the issue

:::::

naka box ning CPU ?

sama ani nga style?


naay intake ug exhaust fans?

[eXpLoDe]

try to put a new thermal paste or grease sa imong processor and reseat your heatsinkfan.

double check if naay ni burot na capacitors sa imong motherboard.

[aiori]

@ sir butitoy
ako na gitry ug ibot and vc sir unya ako gi onboard still the same..
dli ni box sir naa ra sa gawas ang cpu..naa intake and exhaust fan sir..
@ sir explode
bag-o pa ko gailis ug thermal paste sa cpu and gpu sir coolermaster HTK ako gamit
sir baratuhun ra, wala pa kaabot six months sir gikan sa pagreplace nako.
wala burot capacitor sa board sir ako na gi check thoroughly...nagbutang pud ko thermal
paste sa northbride sir...still the same prob....

[eXpLoDe]

well then,the might be the culprit. try to replace your PSU to non-generic but affordable. i recommend you buy FSP Epsilon 500watts tag 1,850 sa PCX and its an 80+ Certified PSU.

other possible problem. ang imong Relay sa Timer. basin nag standby lang siya and dili na mo trigger.

[gaspar_73]

ilisi kuno og lain na monitor bro...

[aiori]

@sir explode
ok sir ako na itry, ug salamat sa paspas nga feedback sir..ehehehe
@gaspar_73
try pud na nako unya sir after work..

[dhekoy33]

try to check your RAM also.

[werty]

try ilis psu-good working brand
replace cmos battery and restore cmos defaults
burn-in with as much minimal hardware as possible sakto lang maka boot ang pc....
try "palutaw" mode...- no casing...

post results....

[valleoliver]

I know this problem, coz this is my problem, hehehe.

TS remove your power supply then check ang mga pins (24 pins) dba naa na sunog.
Power supply ang issue ana. Change power supply lang ok nana. Ilisi na og high end na power supply, naa may tommade 600w tag 1,095 ra sa Gaisano Interpace. ok na kaayo na.

Same ra ato problema, mao rasad ni ako solution.