Question about mobo

[Lingaw-lingaw_sa_payag]

---

Question lang about mobo,

model is Asus P8P67-m.. naa xa 8 pin na para 12v.. kanang dapit sa CPU bah..

pwd ra 4pin ang itaod ana? my PSU does not have 8 pin.. 4 pin lang

[EarlZ]

Question lang about mobo,

model is Asus P8P67-m.. naa xa 8 pin na para 12v.. kanang dapit sa CPU bah..

pwd ra 4pin ang itaod ana? my PSU does not have 8 pin.. 4 pin lang

AFAIK, pwede ra kaayo.

[Lingaw-lingaw_sa_payag]

how would i know where to put the 4pin? on the 1st 4 pin or 2nd 4pin? ( if vertical, top 4 or bottom 4)

[EarlZ]

how would i know where to put the 4pin? on the 1st 4 pin or 2nd 4pin? ( if vertical, top 4 or bottom 4)

See that plastic tab on the 8Pin EPS socket, align the clip from your 4pin there.. either set works as long as it gets connected.

[Lingaw-lingaw_sa_payag]

See that plastic tab on the 8Pin EPS socket, align the clip from your 4pin there.. either set works as long as it gets connected.

nice.. big help bai EarlZ. Thanks a lot

[EarlZ]

No problem!

[gaspar_73]

those extra 4-pins are used in stabilizing those high-end multicore processors(e.g. XEON)..your mobo still works even without those optional 8-pin configuration.

[werty]

pwede ra 4-pin gamiton bisan asa ra ana pwede gamiton na side. stress-reliever lang na ang extra pins incase taas ang current draw sa 12v+ for some reasons...

[Lingaw-lingaw_sa_payag]

Thanks for help everyone - I read that somewhere but Just making sure.. Dont want any risks since i luv this mobo

[eXpLoDe]

pwede ra na marlo. read the manuals pod for precautions...