black screen after bios update - help

[graneil08]

---

good day ninyo bai,

problem:
- bios update successful
- upon restarting problem began ---black screen na halos walai activity sa unit then ang mga lights sa iyahang indicators up tanan
- read nako sa mga ubang forums re-flashing lang sa bios
- follow nako ang mga steps no effect man sa mga sign na ila na-observe sa ilaha
- pero isolate nako, if tangtangon nako ang memory response man (beep)
- naghard reset nasad ko still no effect
note:
- most sa ilang steps nigamit ug usb floppy drive
- pero naa man sad step para sa usb flash drive
unit:
- hp pavilion dv6725ee
- intel dual core
- upgrade os from vista to win7
- memory 2gig
- 160 gig sata drive
any help is much appreciated...salamat

[mariodiaz143]

reset first then reflash bios update but the lower version than the previos version you recently update

[gaspar_73]

basin natarug ang avr while reflashing,or dili supported ang processor ana nga version sa bios.tangtanga ang battery for 20minutes then taud balik...

[Yazbuh]

Try ug reflash sa version nga working siya before

same to what mariodiaz143 said.

[graneil08]

good day ninyo bai,

try na nako but still no effect
discharge nako ang system 24hrs mao gihapon
try sad nako ang recovery crisis na mention sa hp wala sad

salamat sa feedback

[gaspar_73]

good day ninyo bai,

try na nako but still no effect
discharge nako ang system 24hrs mao gihapon
try sad nako ang recovery crisis na mention sa hp wala sad

salamat sa feedback

kiss him goodbye.....

[orlyboy78]

maka post paka?
makasulod ka sa cmos set up?
y man nag update sa bios?
unsay jud ang problem b4 u gi update?
since hp na tawag sa customer service sa hp

[moklo]

BIOS Chip problem na na.. good bye na sa imong unit TS...

[poldopunk]

check current hard drive settings, the previous version might have been IDE as standard setting and the updated BIOS may be on AHCI. its very unlikely for a BIOS update to cause bluescreen errors unless you were overclocking and wala nimo gi set to defaults.

edit:

sorry, i read it as blue screen .
anyway, if you can hear the beep on startup -- cpu, memory controller and memory are ok. the failure could be initializing the display so.....graphics card.

[graneil08]

good day ninyo bai,

upon power on totally blackscreen ang display
unable to enter bios set-up pero mai ang mga light indicator power on
no error beep during power on
mai na basa ko sa iban na forum re-heat lang daw sa chip using hot air

salamat sa feedback